|
|
Led bargraph display 10 segments green.
€ 1.69
| |
|
|
LED bargraph with seven elements. Two red and 5 green leds. Every led can be activated seperatly RM 2.54mm Connections seen from the side | | | | | | | | | | | | | | The first left pin is -, the second pin +, the third pin - and so on. A total of seven LEDS. The two red leds are situated on the left side in the schematic above.
€ 0.95
| |
|
|
LED bargraph display 7x green 3x orange/red
€ 0.59
| |
|
|
LED bargraph display 7x green 3x yellow
€ 0.95
| |
|
|
LED mini matrix 2x2 color green type LB3521-11UAE4 from Ledtech. Four LEDS in one package. You can connect each LED seperatly RM 2.54mm
€ 0.25
| |
|
|
Assortment of 25x LED displays, different types.
€ 4.95
| |
|
|
Led display green. 1 ½ Digit - HxWxD: 20x25x10 - Pitch: 3mm - LED-height: 13mm - current : 20mA - Voltage: 2,6V Common Cathode - LED-7 Segment
€ 0.49
| |
|
|
Big dotmatrix led display color green This display has 40 green leds. Specifications: Measurements: 3,7 cm x 2,4 cm Matrix: 8 x 5 Color leds: green Common cathode (negative) Power: 2,1 volt 20 ma.
€ 2.95
| |
|
|
Big dotmatrix led display color red This display has 40 red leds. Specifications: Measurements: 3,7 cm x 2,4 cm Matrix: 8 x 5 Color leds: red Common cathode (negative) Power: 2 volt 20 ma.
€ 2.95
| |
|
|
Big dotmatrix led display color green This display has 64 green leds. Specifications: Measurements: 6 cm x 6 cm Matrix: 8 x 8 Color leds: green Common cathode (negative) Power: 2,1 volt 20 ma.
€ 3.50
| |
|
|
Big dotmatrix led display color red. This display has 64 red leds. Specifications: Measurements: 3,2 cm x 3,2 cm Matrix: 8 x 8 Color leds: red Common cathode (negative) Power: 2 volt 20 ma.
€ 3.50
| |
|
|
Tiny led display color green This display can show all the numbers and a dot. Specifications: Measurements: 13 mm x 10 mm Color leds:green Common cathode (negative) Power: 2,1 volt 20 ma.
€ 1.25
| |
|
|
Led display color red. This display can show all the numbers and a dot. Specifications: Measurements: 12 mm x 10 mm x 7mm Color leds:red Common Anode (positive) Power: 2 volt 20 ma.
€ 1.25
| |
|
|
Tiny led display color red This display can show all the numbers and a dot. Specifications: Measurements: 17 mm x 12 mm x 7mm Color leds:red Common cathode (negative) Power: 2 volt 20 ma.  1.ANODE E 2.ANODE D 3.COMMON CATHODE 4.ANODE C 5.ANODE DP 6.ANODE B 7.ANODE A 8.COMMON CATHODE 9.ANODE F 10.ANODE G
€ 1.25
| |
|
|
Led display color green common cathode. This display can show all the numbers and a dot. Specifications: Measurements: 18 mm x 13 mm x 7mm Color leds:green Common cathode (negative) Power: 2.1 volt 20 ma.
€ 0.89
| |
|
|
Led display color orange common cathode. This display can show all the numbers and a dot. Specifications: Measurements: 18 mm x 13 mm x 7mm Color leds:orange Common cathode (negative) Power: 2.1 volt 20 ma.
€ 0.69
| |
|
|
Led display color red common cathode. This display can show all the numbers and a dot. Specifications: Measurements: 18 mm x 13 mm x 7mm Color leds:red Common cathode (negative) Power: 2 volt 20 ma.
€ 0.69
| |
|
|
Led display kingbright SA36-11HWA color red This display can show all the numbers and a dot. Specifications: Measurements: 7.5 mm x 14 mm Color leds:red Common anode (positive) Power: 2 volt 20 ma.
€ 0.29
| |
|
|
Numeric LED display fromKingsbright type SA52-11HWA color red. Specifications Measurement: 17,5 mm x 12,4 mm Measurement number: 13mm high Color: red Common anode (positive) Power: 3 volts 20 ma. 
€ 0.79
| |
|
|
Nice display with 20mm high number, color yellow. This display can show all the numbers and two dots. Measurements: 27,7 mm x 20 mm Color leds:yellow Common cathode (negative) Power: 2,1 volt 20 ma.
€ 0.99
| |
|
|
Big led display color green This display can show all the numbers and a dot. Specifications: Measurements: 6,8 cm x 4,8 cm Color leds: green Common cathode (negative) Power: 2,1 volt 20 ma.
€ 2.95
| |
|
|
Led display 4 x 7 segments green common anode Specifications: Hoogte cijfers 10mm Kleur green Voeding 2.1 V Common electrode Anode Operating current 20mA Measurements: 44x16x7mm
€ 3.95
| |
|
|
Numeriek LED display from Kingsbright type CA04-41SRWA color red. Specifications: Display type LED Mounting THT Display type quad 7-segment Digit height 10mm Colour red Luminosity 8-18mcd Common electrode anode Operating current 10mA Wavelength 640nm
€ 3.95
| |
|
|
Led display 4 x 7 segments red Kingsbright CC56-21SRWA Specifications: Hoogte cijfers 14.2mm Kleur red Voeding 1.85 V - 2.5 V Common electrode Cathode Operating current 20mA Wavelength 640nm
€ 3.95
| |
|
|
LCD panelmeter 3 1/2 display for measuring of voltage, amperage, temperature. Display with blue lighting Power 9V DC. Measurement 68x44 mm. With datasheet.
€ 9.95
| |
|
|
16x2 LCD Display CG046-3007-01 with the much used Hitachi HD44780 interface and LED backlight Standard Character Display 2X16 Standard Controller : Hitachi 44780 With LED-Backlight Module Size : 72.00mm(L) x 36.00mm(W) Viewing area : 64.50mm(L) x 16.40mm(W) ATTENTION! In the datasheet you can read the following connection data: 15 LED(-) Anode of LED backlight 16 LED(+) Cathode of LED backlight This is a mistake the correct connections are: 15 LED(+) Anode of LED backlight 16 LED(-) Cathode of LED backlight Connect the LE|D backlight with a resistor of 47 Ohm with +5V (pin 2) and pin 15.
€ 5.95
| |
|
|
LCD display 16x2 with IIC/I2C interface. 2 pins serial control. 4 pins connection > Gnd, VCC, SDA, SCL
€ 9.95
| |
|
|
LCD display 16 X 2 with backlight and HD44780 interface. White characters on blue background. Working Voltage: 5V Display Format: 16 Characters x 2 lines LCD Type: STN Blue LED Backlight: Blue Module Size (L x W x H): Approx. 3.1 x 1.4 x 0.4 inch / 8 x 3.6 x 1.1cm Viewing Area: Approx. 2.5 x 0.6 inch / 6.4 x 1.5 cm
€ 7.95
| |
|
|
LCD display 20x4 with IIC/I2C interface 2 pins serial. Connections > Gnd, VCC, SDA, SCL Interface: I2C I2C Address: 0x3F or 0x27 Pin Definition : GND、VCC、SDA、SCL Back lit (Blue with White char color) Supply voltage: 5V Pcb Size : 60mm×99mm Contrast Adjust : Potentiometer Backlight Adjust : Jumper
€ 12.95
| |
|
|
LCD display type MCG12864A1-6 Truly 128x64 pixels
€ 29.95
| |
|
|
LCD Display glass 32 pins. Shows the following charactersw -1.8.8.8 and a LO-BAT indication. Works on 5 volts and is very energy efficient. Measurements 40mm x 22mm, rm 2.54. Connections: Pin 2 minus sign - Pin 4, 8 and 12 a point . Pin 2 number 1 (first digit) Pin 5, 6, 7, 9, 10, 11, 13, 14 and 15 bottem part 8 elements Pin 16, 17, 18 20, 21, 22, 24, 25 and 26 upper part 8 elements Pin 19, 23 and 27 middel part 8 elements Pin 32 LOBAT indication
€ 0.49
| |
|
|
LCD Display LPH1970-1 Connection datasheet unknown.
€ 0.99
| |
|
|
LCD display Truly MSP-G320240 dot matrix 320x240 pixels No datasheet available
€ 79.95
| |
|
|
LCD display merk Truly MCC164B1-2 16 X 4 reflective STN Complete with 90 cm connecting cable with a female 2x8 header
€ 14.95
| |
|
|
LCD display NOKIA 5110 1,6 inch. Nice display for many applications. 8 pins, connections from left to ricght > reset, CE, DC, Din, Clk, VCC, BL, Gnd
€ 9.95
| |
|
|
LCD display 320x240 TFT 2.8 inch with touchscreen and SD card entry at backside. Driver IC ILI9481. 40 pins connector
€ 19.95
| |
|
|
LCD display 320x480 TFT 3.2 inch with touchscreen and SD card entry at backside. Driver IC ILI9481. 40 pins connector
€ 24.95
| |
|
|
TFT display 7 inch SSD1963 800x480 pixels with touchscreen and SD entry. 40 pins connector, SSD1963 driver. 7.0" TFT LCD Module, Resolution 800x480, SSD1963 Controller LCD Type: TFT Transmissive Normal White Interface: 8/16bit parallel bus interface PCB Color: Blue On board 400mA DC-DC Boost regulator to provide power supply to LCD backlight Module dimension: 186mmx106mmx23mm(including pin header extrusion) Active Area: 154mmx86mm Pixel pitch: 0.179mmx0.179mm Standard 2x20 2.54mm pin header for connection to MCU/development board Module weight: 410grams
€ 79.95
| |
|
|
OLED LCD Module 0.96" inch SPI Communication 12864 with CS pin 6pin. 6 pins connections > GND, VCC, D0, D1, RST, DC
€ 9.95
| |
|
|
OLED LCD Module 0.96" inch SPI Communication 12864 with CS pin 7pin. 7 pins connections > GND, VCC, D0, D1, RST, DC, CS
€ 9.95
| |
|
|
OLED LCD Module 1.3" inch SPI Communication 12864 with CS pin 6pin. 6 pins connections > VCC, GND, CLK, MOSI, CS, D/C
€ 12.95
| |
|
|
OLED LCD Module 1,3" inch SPI Communication 12864 with CS pin 7pin. 7 pins connections > GND, VCC, D0, D1, RST, DC, CS
€ 19.95
| |
|
|
Dot Matrix Display Module Kit based on the MAX7219. Easy to solder together.
€ 6.95
| |
|
|
2,4" inch TFT Touch Screen Mega 2560 R3 and UNO R3 Compatible with sd card entry at the back. ILI9488 driver
€ 15.95
| |
|
|
3.5" inch TFT Touch Screen Mega 2560 R3 and UNO R3 Compatible with sd card entry at the back. 36 pins connector ILI9488
€ 24.95
| |
|
|
4 bits TM1637 LED display module. Connections GND, VCC, DIO, CLK
€ 4.95
| |
|
|
Dot Matrix Display Module 256 leds MAX7219. 4 matrix displays 8x8=64 leds each. Total 256 leds. With connection wires.
€ 19.95
| |
