Power supplies

LAB power supply 0-15V DC / 1A 

OUIT 0 - 15 V / DC 1 A. Voltage digital LCD display. With USB-A and. USB-B contact.

Measurements (LxBxH): 155 x 105 x 155 mm. Weight 1400 g. Power 230 V / AC, 50 Hz.

LAB power supply 0-15V DC / 2A 

OUT 0 - 15 V / DC 2 A. Voltage and current digital LCD display. 

Measurements (LxBxH): 240 x 150 x 95. 

Power supply 12 volt 1,2 amps.

Input 200 - 240 volt AC  50-60 HZ. With a 2,1mm plug. Polarity: inside positive, outside negative.

Power supply 9 volt 1 amps.

Input 100 - 240 volt AC  47-63HZ. With a 2,1mm plug. Polarity: inside positive, outside negative.

Universal stabalised power supply 5V - 12V in steps of 1 volts. 30 Watts.

Very compact and super efficiënt adapter with 5 to 12 Volt output.

• Inputvoltage : 100 - 240V AC

Power supply Hitron HER-57-324. Input AC 115-230V output DC 12 V 

Output: DC +12 volt 0,25 amp and -12 volt 0,075A. 

Deliverd without power cord.

Power supply SCL25-7614 Artesyn +9,5 volt 2,5 A

Input 100 - 240 volt AC  50-60HZ

Supplied without 220V power cord.

With a special 8 pin output plug.

Measurements 158mm x 87mm x 37mm

Power supply  SCL25-7621 Artesyn 14 volt 1,7 A

Input 100 - 240 volt AC  50-60HZ

Supplied without 220V power cord.

With a special 8 pin output plug.

Measurements 158mm x 87mm x 37mm

Power supply SCL25-7617 Artesyn +48 volt 0,5 A

Input 100 - 240 volt AC  50-60HZ

Supplied without 220V power cord.

With a special 8 pin output plug.

Measurements 158mm x 87mm x 37mm

Power supply 6 VDC 700mA. Input 100- 260VAC - 50-60 Hz

With 1,6 meter long cable and specialo p[ug. See detail page.  

Power supply 1000 ma. Comes with six different plugs.

Car cigar lighter splitter / adapter 3 way with USB

Input DC 12V through cigar lighter connection

Uitput 2 x DC 12V max.10A), 1 x DC 12V (max.10A) and 1 x DC 5V (1A) via USB.

Measurements. 100x70x40mm, Weight 850g.

Battery power level indicator / audio level indicator with 5 LEDS. 

Suitable for voltages between 3.5V and 12V, both AC as DC.

Jumper gives choice between AC or DC. Measurements: 29 (mm) x21 (mm)

3,3 volt power module AMS1117-3,3V. Input 4,5-7,2V output 3,3 volt 800ma.

5 volt power module AMS1117-5V. Input 6-12V output 5 volt 800ma.

3.3V, 5V and 12V power module. Input 12 Volts output 3.3 Volts, 5 Volts and 12 Volts. With on /off switch

Power input standard 2.1mm input.

Dimension(L x W x H): Approx 32mm x 30 x 12 mm 

DC-DC step down powermodule  24V/12V input to 5 Volt 5A. 

Dimension(L x W x H): Approx. 45mm x 30 x 16 mm 

DC-DC step up module 1.3V-1.8V-2.5V-3V-3.3V-3.7V-4.2V to 5 Volt

Dimension(L x W x H): Approx. 11mm x 11 x 12 mm 

DC-DC step up module 3V-35V to 3.5V-35V 100 Watts with digital voltage LED display

Dimension(L x W x H): Approx. 68mm x 42 x 16 mm 

DC-DC boost converter 0,9V-5V to 5 Volts USB output

Between 0.9 volts and 5 Volts input gives 5 Volts USB out 600mA max.

Dimension(L x W x H):30mm x 18mm x 8 mm

Solar Boost DC-DC 3V-5V Adjustable Power Supply Module

With1000mAh output current

Under-voltage indicator with average efficiency up to 94%

Indicator Function: When the voltage is sufficient, indicator lights on; When voltage is lower than 2.7V and the light goes out, you should charge as soon as possible

Use Range: DIY mobile power, voltage adjustment, regulated power supply

Specification:

Input: IN + / IN -

Output: Standard USB

Input Voltage: 0.9 - 6V

Output Voltage: 3.3 - 9V

Output Ripple: 50 mV ( Max.)

Operating Temperature: Industrial grade ( -40 degree C to 85 degree C)

Full Load Temperature Rise: 20 degree C

Quiescent Current: 130 uA

Load Regulation: ±1%

Voltage Regulation: ±0.5%

Size ( L x W x H ): Approx. 1.3 x 0.7 x 0.5 inch / 3.3 x 1.8 x 1.3 cm

USB DC-DC step down buck convertor module 4.5V-40V to 5 Volts 2A USB with LED display. 

Measurements (L x W x H): circa 57mm x 22 x 12 mm 

Adjustable DC-DC 150 Watt step up power module. Input 10-32V Output 12-35V (adjustable)  150 Watt.

A LM2596S step-down power module, with a wide 4V to 40V input range and the output voltage is adjustable from 1.5V to 35V. The max. output current is at 3A. Stable and high efficiency DC-DC step-down power module, perfect voltage switching regulator with wide applications.

Dimension(L x W x H): Approx. 47 x 20 x 13 mm (With potentiometer)

Adjustable DC-DC step up power module with a LM2577. Input 3-30 Volts to 4-35 Volts at 3 A. .

Dimension(L x W x H): Approx.  51 x 22 x 13 mm

A LM2596S step-down power module deluxe , with a wide 4V to 36V input range and the output voltage is adjustable from 1.5V to 35V. The max. output current is at 3A. Stable and high efficiency DC-DC step-down power module, perfect voltage switching regulator with wide applications. Should fine-tune the potentiometer to regulate, users can toggle DIP switches set to 0.5V step value. In total 6 step settings.

TP4056 1A LIPO battery charging module. Input voltage between 4V and 8 volts with an output of 5V through the USB connector max 1A.

Adjustable Step-down Power Supply Charger Module w/ USB Output

With constant current and voltage limiting function, it can also serve as a charger module

USB output supports power charging for iPhone, MP3, MP4, PDA, PSP, etc

Apply the input terminal to car lighter and USB output terminal to your mobile phone, Mp3, Mp4, PDA, etc

Input Voltage: 7-16V

Output Voltage: 4.8-5.3V ( Approx. 5.3V when no-load)

Output Pattern: Standard USB

Output Current: 600-800mA

Short-circuit Protection: Current limiting, self-recovery

Circuit Board Size (L x W x H): Approx. 24 x 22 x 18 mm

Universal USB car lighter adapter with double USB output. You place this adapter in the car lighter connection of your car and the 12 volts or 24 volts is transformed to 5 volts. With this adapter you can charge two USB devices like Ipod, PDA or MP3 player at the same time while driving.

Specifications:

• Voltage input: 12/24 V DC

• USB Output: 5 V DC / 2x 500 mA

• On/off LED indicator

• Short protection

• Automatic power protection